01.

Install FC in the hydraulic oil cooler – Verify O-ring has sealed properly.

02.

Run Wire from the battery - to fuse (not supplied) - to one of the FC 3/8″ fast-on lugs (Do not connect to battery).

03.

Run a wire from the other FC 3/8″ fast-on lug to the fan motor Positive.

04.

Run a wire from the fan motor Negative to the battery ground.

05.

Connect FC 1/4″ fast-on to machine ground.

06.

Inspect for proper connections – and attache Positive wire to the battery.

07.

Depress Button - fan should spin in the correct direction.

08.

The controller is now ready to use at the factory default temperature of 120F.

FCX1-FCM1 Mode Insrtruction Download

Download