Make Fan Control as fast and simple as possible
Save time and reduce costs with a complete
engineered solution.
Feature-packed and fully customizable.
FCX1 Stand Alone Fan Controller
FCX1 Fan Controller
Integrated sensor, controller, and power relay.
FCM1 Fan Controller
Controller and power relay. Works with our FCRP temperature probe or alternatives, such as a customer-supplied temperature switch.
FCM1 Fan Controller
FCRP Temperature Sensor
FCRP Temperature Sensor
Digital temperature sensor for use with the FCM1 fan controller or specific customer applications.
FC Series Design and Features
12VDC or 24VDC machine operation. Automatic switching to match incoming voltage.
Heavy-duty 70A current rating.
State-of-the-art microprocessor-based controller.
Purpose-built power relay designed exclusively for OEM Fan Control and the FC controller line.
Precision digital temperature sensor.
Available in industry standard SAE, NPT, and metric fittings.
Simple installation, only three wires to connect.
Extremely low 6uA battery current draw eliminates the need for wiring to a key switch circuit.
Simple interface for temperature adjustment or manual override.
LED display for status and temperature monitoring.
Integrated EMF suppression.
Electronics sealed in epoxy. IP69K rating (depending on connection type).
Custom Options
OEM versions with part numbering and logo
Programmed temperature setpoint, non-adjustable.
Custom OFF setpoint (standard is 5° lower than ON setpoint)
Wiring for connection to machine ignition switch.
Setup of FCM1 controller with fixed temp switch.
Magnet wand control interface.
More options available, contact us to discuss your ideas.
Manual override, self-test, and factory reset modes.
Programmable temperature setpoint from 120°F to 170°F in 10°F increments.
LED oil temperature indicator.
Includes EMF supression, automatic voltage sensing, and status communication.
Designed for easy implementation.
4 Simple
Installation Steps
See the Quick Start Guide and full installation instructions for more information.
Step 01
Install FCX1 fan controller or FCRP temperature sensor into the oil cooler.
If using the FCRP, mount and connect the FCM1 controller.
Step 02
Provide a fused connection from battery positive to one of the controller terminals labeled "V+/F”. (The two"V+/F"terminals are interchangeable.)
Step 03
Connect the other"V+/F" terminal to fan motor positive.
Verify the motor has a proper ground connection.
Verify the motor has a proper ground connection.
Step 04
Connect the terminal labeled "GND" to machine ground.